Burgess Lumber

3610 Copperhill Lane, Santa Rosa

Mon. - Fri. 6:30 am to 5:00 pm  |  Sat. 8:00 am to 4:00 pm  |  Sunday Closed

Burgess Lumber
lumber • engineered

Doug-fir stock, .40 ACQ treated, engineered framing lumber, redwood and cedar.
At Burgess we take our redwood to heart and supply only the finest quality framing lumber.
Contact our pro desk for further details or if the item you are searching for is not listed.

Click for larger images and more information. 

desk: (707) 542-5091

fax: (707) 542-7117

Douglas Fir - Framing Lumber

In comparison to its weight, Douglas fir ranks as the strongest of all American woods and it is naturally
dimensionally stable, having the ability to season well in position. Many builders prefer to cut, nail and fasten
Douglas Fir in the "green" or unseasoned condition, allowing it to air dry during construction.

Larch, Doug & Hem Fir - green S4S
2X4 to 2X12 8' - 20' |#2&BTR| 3X4 to 3X12 8' - 20' |#2&BTR| 4X4 to 4X12 8' - 20' |#2&BTR|
6X6, 6X8, 6X10, 6X12 8' - 20' |#1&BTR| 2X4, 2X6 92-1/4 104-1/4 116 1/4|STUDS|
S4S surfaced four sides. Structural Light Framing grades.
Hem Fir, Douglas Fir and Western Larch share nearly identical structural characteristics
Hemlock is coastal and typically has a higher moisture content

Contact our pro desk for our clear vertical, select, kiln dried and appearance grade selections

.40 ACQ Treated Lumber

Burgess treated lumber uses dimensionally stable Doug-fir with ACQ a waterborne system that is copper-based.
Incised for deeper penetration of treatment and .40 ACQ a higher preservative content rated for ground contact.
ACQ copper and quaternary provide protection from fungi, termites and prevents rot and decay.

Doug Fir - S4S .40 ACQ
2x4 to 2x12 | 3x6 | 4x4 4x6 4x8 4x12 | 6x6 all ST&BTR 8' - 20'
Standard and better grades, surfaced four sides. Larger timbers special order 1-5 days
Use either hot dip galvanized or stainless steel fasteners with ACQ treated lumber

Engineered Framing

Burgess Lumber provides a wide selection of engineered framing for your project needs
Our pro desk can assist you with special order quick turn arounds and plan take off
Glu-lam, I-joist, LVL - laminated veneer lumber, LSL - laminated strand lumber, panels, connectors and more...

Glu-lam Beams
3 1/8 | 5 1/8 | 6 3/4 | 8 3/4 | conventional depths of 1-1/2 increments as well as I-Joist compatible depths
Special order DF & AYC Glu Lams and treated Glu Lams available

Parallam Plus PSL Beams
3 1/2 x 11 7/8 | 3 1/2 x 14 | 5 1/4 x 11 7/8 | 5 1/4 x 14
Special order available, Parallam Plus PSL for Exposed Framing Applications

LVL
1 3/4 | 3 1/2 | 5 1/4 | 7 depths: 3-1/2, 5-1/2, 7-1/4, 9-1/4, 9-1/2,11-1/4, 11-7/8, 14, 16, 18, 20, 22, 23-7/8
Special order available

LSL
1-1/2 | 1-3/4 | 3-1/2 depths: 3-1/2, 4-3/8, 5-1/2, 7-1/4, 9-1/4 9-1/2, 11-1/4, 11-7/8, 14, 16, 18, 20, 22, 24
Special order available

I-Joist
All major selections of Flange Widths and Depths
Special order available, solid sawn lumber or LVL flanges
Floor and Roof framing, ideal for cathedral ceilings

Contact our pro desk for our earthquake panels, connectors and other selections not listed

Redwood and Western Red Cedar

Redwood is dimensionally stable and not prone to checking or splitting. In all heartwood grades it is decay-resistant
and more insect repellent than other softwoods. It is popular due to its beauty and long-lasting performance.
Almost as decay resistant Western Red Cedar is also stable with a very low shrinkage factor that is free of pitch.

Con-Heart Redwood - Surfaced & Rough
1x2 to 1x12 | 2x4 to 2x12 | 3x3 3x4 3x6 3x8 3x12 | 4x4 to 4x12 | 6x6 6x8 6x12 | 8x8
Construction Heart - knots of varying sizes and other slight imperfections, graded for strength
Other grades available: Con Common, Select. B Grade, Clear, Select Heart, Heart B, Clear All Heart

Western Red Cedar (STK) - Surfaced Kiln Dried
1x4 to 1x12 | 2x4 to 2x12 | 4x4 4x6 4x8 4x12 | 6x6 6x12
STK - Select Tight Knot - Sound, tight knots, slight imperfections and natural markings are of fairly uniform distribution

See the deck/rail/fence page for more decking options or ask the pro desk if an item is not listed

TEL:
(707) 542-5091

ORDER FORM:

Print out the .pdf
Fill it out & fax it back

FAX:
(707) 542-7117

© Burgess Lumber
website by altereagle.com

aaaaaaaaaaaaiii