Burgess Lumber

3610 Copperhill Lane, Santa Rosa Mon. - Fri. 6:30 am to 5:00 pm | Sat. 8:00 am to 4:00 pm | Sunday Closed
desk: (707)542-5091 fax: (707)542-7117 sales@burgesslumber.com

Burgess Lumber Engineered

plywood • siding • trims

ACX, CCX, CDX, BBOES, OSB, and Treated plywood. Doug-fir, engineered, redwood, pine and Cedar siding.
Exterior trim mouldings factory primed and engineered selections, siding patterns to meet most demands.
Contact our pro desk for further details or if the item you are searching for is not listed.


Plywood

fir plywoodsheathing and treated plywoodconcrete form plywoodosb sheathing

With plywood grades the first letter is the face or front, the second letter is the back side grade. "A" sanded down to
"D" construction, basically. The third letter tells you whether the plywood is suitable for interior or exterior use.
In the case of plywoods ending in "X", such as CDX and CCX plywood, the "X" stands for exterior adhesive.

ACX CCX CDX Plywood - Exposure 1
Panel Thickness: 3/8 | 1/2 | 5/8 | 3/4
Square Edge: 4 x 8  |  4 x 9  |  4 x 10
Tongue & Groove:  4 x 8 (3'-11 1/2 x 7'-11 7/8) |  4 x 9  (3'-11 1/2 x 8'-11 7/8) |  4 x 10 (3'-11 1/2 x 9'-11 7/8)

Exposure 1 panels may be used for applications where construction delays may be expected prior to providing protection

Sanded ply's from the nominal can be 1/32 to 1/16 less in thickness.
Contact the pro desk for exact sizes and for our structual or special order ply.

BBOES Concrete Form Plywood
Panel Thickness: 3/4 Square Edge: 4 x 8
BBOES stands for B Grade Face Veneer, B Grade Back Veneer, Oiled and Edge-Sealed. B-B Concrete Form plywood has been fully sanded on both sides and factory treated with a high quality release agent.

The edges have been sealed to protect from water absorption during the concrete pouring and curing process.

.40 acq Treated Ply
Panel Thickness: 1/2 | 5/8 | 3/4
Square Edge: 4 x 8 
Tongue & Groove: available in 5/8 & 3/4 - 4x8

.40 acq is a higher grade ground treatment

OSB oriented strand board
Panel Thickness: 7/16 | 15/32 | 1/2 | 19/32 | 23/32 | 1-1/8
Square Edge: 4 x 8 | 4 x 9 | 4 x 10
Tongue & Groove: 4 x 8 | 4 x 9 | 4 x 10

Floor, wall and roof sheathing

Particle Board
Panel Thickness: 1/2 | 5/8 | 3/4
Square Edge: 4 x 8


Siding & Trim

fir sidingredwood sidingcedar sidingsiding profiles

Primed spf trims, redwood trim and siding, engineered trim and siding, fir rough-sawn siding, cedar trim, siding and paneling.

SPF primed trim
Sizes: 1x4 | 1x6 | 2x4 to 2x12 | 16' and 20' - S1S2E

SPF - spruce / pine / fir - builder grade trim | S1S2E - Surfaced One Side, Two Edges, Rough Reverse Side

Rough-Sawn Fir Siding
Panel Thickness: 19/32 (5/8)
Sizes: 4 x 8 | 4 x 9 | 4 x 10
Groove Patterns: Select Doug-fir veneer, S/L, RBB pattern 4", 8", 12", or Plain

S/L - ship lap, RBB - reverse board and batten (sometimes referred to as T-1-11)

LP Smartside trim & siding - engineered
The warmth and beauty of traditional with the durability of pre-primed engineered wood.
Trim & Fascia, Textured Reversible Shake, Lap Siding, Soffit and Shiplap Panels

Redwood trim & siding
Natural beauty and durability ease of workability, resistance to shrinking,
warping and checking, and natural fire and bug resistant.
Trim & Fascia, Shiplap, Rabbetted Bevel , T&G, Cove, and moulding

Cedar trim, fascia, siding & paneling - Burgess Recommended good pro reviews
Clear heart KD fingerjointed cedar with factory applied oil-base prime on all surfaces.
VERTICAL GRAIN western red cedar, naturally decay resistant - 50 year warranty by TFP
Trim & Fascia, V-rustic Shiplap, Bevel Channel, Rabbeted Bevel , T&G ECBC, Cove, 3 lap

Primed Mouldings & Interior Finish Trims
Kelleher mouldings - Primed MDF, pine, doug-fir and redwood.
Crown, casing, base, jamb, 1/4 1/2 full round, stops, chamfer and handrail.